Atomlab¢â500Plus Dose Calibrator
[Display]
1) Display: LCD Touch Panel 6.5" x 5", function keys are displayed for the operation being performed
- Dimensions: 9.5" w x 12" depth x 12" h (24.1 x 30.5 x 30.5 cm)
- Weight: 6.3 lb (2.9 kg); desktop or wall mountable
2) Line Voltage: 100 to 240 VAC, auto selectable by the power supply
3) Line Frequency: 50/60 Hz, detachable line cord, built-in EMI filter and transient suppression
4) Auxiliary Ports: Two USB ports, one RS-232 port
[Atomlab¢â 500 Dose Calibrator]
1) Isotope Selection Keys: Twelve pre-programmed, 25 user-defined isotopes and a full alphabetical list of 89 isotopes.
2) Activity Range: 0.01 µCi to 100 Ci (.0004 MBq to 3700 GBq) of Tc-99m or 25 Ci of F-18
3) Energy Range: 25 keV to 3 MeV photons
4) Response Time: One to two seconds for doses greater than 200 µCi;
three seconds for doses greater than 20 µCi;
50-100 seconds below 20 µCi of Tc-99m with default threshold, threshold adjustable to reduce counting time
5) Detector Linearity: ¡¾ 1% or 0.2 µCi, whichever is greater
6) Electrometer Linearity: ¡¾ 1% or 0.2 µCi, whichever is greater, up to 40 curies of Tc-99m, ¡¾ 1.5% up to 100 curies of Tc-99m
7) Electrometer Accuracy: ¡¾ 1% or 0.2 µCi, whichever is greater
8) Overall Accuracy: ¡¾ 3% or 0.3µCi, whichever is greater
9) Repeatability: ¡¾ 0.3% above 1 mCi short term (24 hr); 1% long term (one yr)
10) Detector: Well-type pressurized ionization chamber, with Argon fill gas
Up to seven chambers can be serially connected to one display.
11) Detector Shielding: .25" (6.3 mm) lead on all sides except top well opening; supplementary shielding available
12) Power Requirements: 100 to 240 VAC, 0.38 – 0.15 amps, auto switching
13) Detector Unit:
- Dimensions: 6" dia x 15.5" height (15.24 x 39.37 cm)
- Well I.D.: 2.75" dia x 10.5" h (7 x 26.7 cm)
- Well I.D. with Liner: 2.5" dia x 10.25" h (6.35 x 26 cm)
- Lead Shielding: .25" lead (6.3 mm)
- Weight: 35 lb (16 kg)
[Atomlab¢â Wipe Test Counter]
1) Preset Radionuclides: 27 including Tc-99m, Co-57, Cs-137, Ga-67, Tl-201,I-123, I-125, I-131, In-111, F-18
2) Dimensions:
- Size: 6" d x 10.5" h (15.24 x 26.6 cm)
- Weight: 29 lb (13.2 kg)
3) Detector: 2" x 2" NaI (Tl) integral line scintillation detector with a 0.75" dia. x 1.44 " depth well (1.9 x 3.7 cm)
4) Style: Remote Detector
5) Channels: 64
6) MCA: Integral to Well Counter
7) Spectral Resolution: FWHM 10%
8) Count Rate: (Maximum) 30,000 cps
9) Lead Shielding: 0.5" (1.2 cm) integral lead shield
http://www.biodex.com/nuclear-medicine/products/radiopharmacy/dose-calibration/atomlab-500plus-dose-calibrator
*ÀÚ¼¼ÇÑ ³»¿ëÀº ¸µÅ©³ª ÷ºÎÇÑ ÆÄÀÏ¿¡¼ È®ÀÎ ¹Ù¶ø´Ï´Ù.